Teddy Bear T-Shirts

Dipping Bears/Wax Bears

Baby Products

Baby Plush

Bath & Body Products

Plush Animals

Fun Adult Products

Christmas Bears

Lucy Hicks, Account Manager

800-700-7940

Basic Instructions for Wax-Dipped Animals

1. Melt wax* (add about 1.5oz of fragrance per every lb of wax used) stirring well. At this time you can add dye to match darker or colored bears allowing it to blend better with the material. The average wax temperature is 170-200º F.
2. After the wax is melted, unplug the cooker so as not to exceed 200º F. If the wax is too hot, the animal may shrink and become misshapen.
3. Using a pair of tongs, dip and roll the animal in the wax for about 2 min or until well saturated.
4. Using the tongs pull the animal out of the wax and, while wearing thick rubber gloves, squeeze out some of the excess wax. Tip: if you put the animal on a screen over your pot, the wax will drip back into your pot for the next animal. This means less waste and less mess!
5. Immediately use a large tooth wire comb (or fork in a pinch) to comb or fluff the hair. Longer hair requires more fluffing. This must be done before the wax hardens.
6. Next let cool to the touch, then put on a cooking sheet to finish the process. You can pose them at this point. To completely dry, let stand about 2 hours.
7. Once completely cooled you can package them in a cellophane bag and tie with a decorative ribbon. We recommend enclosing instructions for care.

* If you don't have a professional setup to melt the wax, you can use several methods found in your kitchen. You can use a double boiler, or boil water in a larger pot with the wax melting in second smaller pot inside the first. This method heats the wax to 212º F so let it cool slightly before dipping. Other methods include turkey roasters, deep fryers and crock pots where you can choose the desired temperature. Start slow and increase the temperature in increments for best results.

Additional Comments

1. The general consensus is that 1 larger animal or two smaller animals require about 1 lb of wax with the average size being 6-10" sitting (head to tail).
2. Jointed bears allow for easier posing, but any sitting animal will work as well. 
3. Never put wax-dipped animals directly on wood. A dish, glass or metal, will protect the wood surface from stain by the oils in the wax.
4. Keep out of the reach of children, as these animals are no longer toys.
5. Wax dipped animals do not need wicks because they are not meant to burn.
6. Get creative with bows, decorations, packaging, accessories and poses. Have fun!
   

Click Here For Wholesale Dipping Bears  Dipping Bears/Wax Bears